Covert Spy
Hidden Pinhole Colour
CCTV Video Surveillance Camera in PIR CASE. Connect to 12 VDC, Composite Video
AV input on TVs, VCRs, etc. 1/4 inch CCD Video Camera Image Sensor with Digital
Signal Processing, suitable for normal light levels in Homes, Offices,
Showrooms, etc. Ideal for discreet or covert surveillance Pinhole Lens is
concealed and unit is unobtrusive with the appearance of a common movement
detector. For: general CCTV Video Surveillance Observation and particularly for
covert or discreet Closed Circuit Television surveillance. Use with our CCTV -
TV / VCR Interface Module and connect to TV antenna system for viewing /
recording on all TVs and VCRs.
Cat Code:
PIRC-C
1/4" CCD Image Sensor * CONCEALED
PINHOLE Colour PCB
MODULE in PIR CASE.
Includes 5.5 mm Pinhole Lens & Swivel
Mounting Bracket
¼"
LOW BLEMISH COLOUR
CCD Image Sensor PCB Camera Module
with 5.5 mm Pinhole Lens concealed in PIR CASE * Digital Signal
Processing CCTV Video Surveillance Camera suitable for normal light levels in
Homes, Shops, Showrooms, Offices, Warehouses, etc * DIY Plug-In installation
when purchased with Plug Pack and Cable/Adaptor Set.
Video Output: 1 v p-p Composite Video 75 ohms, suit
Australian TV, VCR, AV & Video inputs via BNC socket on ~ 30 cm cable.
Horizontal Resolution: ~ 440
lines. Better than VHS * Near Super-VHS resolution.
Minimum Illumination: ~ 2 lux @ F1.2.
Spectral Sensitivity: ~ 400 to ~ 700 nm - with
standard Lens.
Automatic Electronic Shutter (AES): 1/50 to 1/100 000
second, 20 milliseconds to 10 microseconds.
Automatic Gain Control: ~ 18 dB.
Signal to Noise ratio: ~ 46 dB.
Power Requirements: 12 Volts DC Regulated, ~ 95
milliamps via 2.1 x 5.5 mm DC socket on ~ 30 cm cable.
Dimensions: ~ 60 mm Wide, ~ 115 mm High, ~ 31 mm Deep
excluding swivel bracket, ~ 100 mm including bracket.
Tilt and Pan range ~ ± 25°.
Made in: Taiwan.
Manufacturer's Experience:
8 + Years, ISO 9001 Certified.
Accessories:
Plug-In DIY AV 20 metre Cable / Adaptor Set: 20
metre AV Cable with moulded Plugs & Socket. Two RCA Plugs & DC Plug for Camera
end. Two RCA Plugs for input device, DC Socket for Plug-Pack. Two BNC-RCA
Adaptors for Camera, VCR, Quad, Switcher, Multiplexer, Monitor, Transmitter,
etc.
